22754644 & 23156466 | Genuine GM® ABS Module & Pump, 2012-17 Equinox/Terrain

SKU: 22754644-23156466 MPN: 22754644

Remanufactured Genuine GM® ABS assembly for 2012-2017 Chevrolet Equinox and GMC Terrain: EBCM 22754644 already mounted on hydraulic modulator 23156466. Replaces the electronics and the pump and valve unit; bleeding and scan-tool programming are required.

$649.00
No Core Charge
In stock
  • Free shipping over $199Order today — get it Nov 23
  • Clock Icon
    Ships same day Order before 7 PM EST
  • Local pickup available Usually ready in 24 hours
Need it fast? We offer overnight shipping

Contact us to check if overnight next-day delivery is available for your order - PN: 22754644

Product Description

Product Name ABS Brake Control Module with Hydraulic Modulator Assembly
Condition Remanufactured
Brand GM®
Part Number 22754644 & 23156466
Vehicle Compatibility
Chevrolet Equinox 2012–2017 (L, LS, LT, LTZ, Premier)
GMC Terrain 2012–2017 (SL, SLE, SLT, Denali)
Engine Compatibility
Engines 2.4L L4, 3.0L V6, 3.6L V6 (gas and flex fuel)

Useful Information

Description and Purpose:

This is a remanufactured Genuine GM® ABS assembly: electronic brake control module (EBCM) 22754644 already bolted to hydraulic brake pressure modulator 23156466. Together they make up the complete anti-lock brake unit under the hood of the 2012–2017 Chevrolet Equinox and GMC Terrain, in every trim, engine and drivetrain.

The module is the electronics: it reads the wheel-speed and chassis sensors, runs ABS, traction control and StabiliTrak, and powers the valve coils and, through an internal relay, the pump motor. The modulator, often called the ABS pump, is the hydraulics: the pump motor, twelve valves, high- and low-pressure accumulators and a brake pressure sensor.

Assembly vs. Module Only:

GM services the module and the modulator separately, so an ABS fault can sit in either half. This listing replaces both.

  • Parts replaced: this assembly replaces the module and the complete hydraulic modulator; the module only replaces just the module, and your modulator is reused.
  • Brake lines opened: six with this assembly, none with the module only.
  • Bleeding: required with this assembly; not part of GM's procedure for the module only.
  • Programming and setup: required either way.
  • Choose this assembly for hydraulic symptoms (a pedal that stays soft after bleeding, no pressure to one wheel, a dragging brake) or a C0110 pump code not yet traced to the module or the motor.
  • The module alone is enough when testing pins the fault on the electronics and the modulator works normally; it costs less and needs no brake-line work.
  • Why the assembly costs more: it adds the whole hydraulic modulator, the mechanical half of the unit, and comes with the module already mounted, so the sealed joint between the two halves stays closed.

Need only the electronics? See the 22754644 module-only listing.

Vehicle Fitment:

Check the labels on your old unit first: 22754644 on the module and 23156466 on the modulator mean a direct match.

Years and models are listed under Vehicle Compatibility, and engines under Engine Compatibility, in the table above.

No RPO code is needed. Factory labels can carry a production number instead of GM's service number; if yours does, confirm by year and model. Does not fit 2010–2011 or 2018 and newer models, or the Cadillac SRX.

Common Symptoms and Trouble Codes:

  • ABS, traction control and StabiliTrak warning lights, or a Service StabiliTrak message.
  • Hydraulic symptoms commonly reported by ABS rebuilders: a spongy pedal that will not bleed out, no pressure to one caliper, a dragging brake or a pull when braking.
  • C0110 (pump motor circuit malfunction, open or motor stuck) shuts off ABS, traction control and StabiliTrak for that key cycle. ABS repair shops commonly report it, with C0550 (ECU performance), on Equinox units with internal pump or module failures.
  • Rule out look-alikes: wheel-speed codes from encoder-ring debris, X411 wiring faults (see the FAQ below) and, on 2012 models, C056D stored in the yaw sensor, which GM bulletin PIT5187A fixes with a new sensor, not an EBCM.

Installation Notes:

  • The unit is under the hood; remove the accessory wiring junction block first. Turn the ignition off before unplugging the module, or it can be damaged.
  • Disconnect and cap the four outlet lines and two master-cylinder lines, remove the bolt and lift the unit straight up; do not lever on the accumulator caps.
  • GM torque: modulator bolt 10 N·m (89 lb-in), brake pipe fittings 21 N·m (16 lb-ft), bracket bolt and nut 10 N·m.
  • Bleeding is required: a conventional pressure or manual bleed first; if the pedal is still soft, the scan-tool ABS Automated Bleed with a well-charged battery.
  • Programming and setup are required through GM SPS with a GM-capable scan tool (GDS2 with an MDI, wired, steady battery voltage), then the brake pressure sensor calibration and, if requested, steering angle centering and a yaw-rate learn.

Manufacturer Information:

Genuine GM® (General Motors) parts. GM catalogs 22754644 as the Electronic Brake & Traction Control Module Kit and 23156466, which replaces GM 25926939, as the Electronic Traction Control Brake Pressure Modulator Valve Kit.

Warranty:

Parts Finder Q offers a 365-days warranty for all types of parts in any condition. The warranty applies exclusively to purchases made directly through our website (partsfinderq.com). Please note that purchases made through third-party platforms like eBay or Amazon are not covered by this warranty.

Questions & Answers

About Genuine GM® ABS Module & Pump, 2012-17 Equinox/Terrain 22754644

Not sure it fits?

Send us your VIN — we'll confirm compatibility before you order.

Send your VIN Call +1 828-440-0199

Will 22754644 fit my vehicle?

Part 22754644 is listed for Chevrolet Equinox 2012–2017 (L, LS, LT, LTZ, Premier), GMC Terrain 2012–2017 (SL, SLE, SLT and Denali) with 2.4L L4, 3.0L V6 and 3.6L V6 (gas and flex fuel) engines. To be sure, match the part number on the label of your old module, or send us your VIN — we'll confirm compatibility before you order.

Will this assembly fit a 2010, 2011 or 2018 Equinox or Terrain?

No. The 23156466 modulator fits 2010–2017, but 2010 and 2011 models use modules 25926937 and 20837392, so the assembly fits 2012–2017 only; 2018 and newer models use a different ABS system.

I'm replacing the ABS pump on my Equinox. Do I have to move my old module over?

No. The 22754644 module is already bolted to the 23156466 modulator, so the unit goes in as one piece and you skip GM's module-transfer step (four bolts, new seals if the old ones come out).

Does this ABS module need programming after installation?

In most cases, yes. GM ABS control modules usually need to be programmed or configured for your vehicle after installation using a dealer-level scan tool. Programming is done by your dealer or a local repair shop.

Is there a core charge?

No. There is no core charge on 22754644 — you don't need to send your old part back.

My scan tool shows C0110. Do I need the whole assembly or just the module?

Either half can set it: the motor is in the modulator, its relay in the module. GM's test lamp across the module's pump terminals decides it: if the lamp follows the scan-tool command, replace the modulator; if not, the module. Without that test, the assembly covers both.

Service StabiliTrak, ABS or AWD messages come and go with lost-communication codes. Is the ABS unit bad?

Check the wiring first. GM bulletins PIT5171B/C/D and PIT5427A trace codes such as U0073, U0074, U0121 (lost communication with the ABS module) and U0126 to a broken, chewed or corroded wire at connector X411 under the left rear.

What does "Remanufactured" mean?

A remanufactured 22754644 is a genuine GM module that has been restored to working condition for reliable operation. It is covered by our 365-day warranty, the same as a new part.

What are the symptoms of a bad ABS control module?

Common signs are an ABS or traction control warning light, stored ABS fault codes, ABS activating at low speed, or loss of communication with the module. Reading the fault codes with a scan tool is the best way to confirm the module is the cause.

Where is the ABS module located?

On most cars and pickups, the ABS control module is mounted on the brake hydraulic unit (modulator) in the engine compartment, usually near the brake master cylinder. The electronic module bolts onto the hydraulic unit and connects through one main electrical connector.

Can I drive with a bad ABS module?

Your regular brakes will still work, but anti-lock braking, traction control and stability control may be disabled, which increases stopping distance on slippery roads. We recommend repairing it as soon as possible.

How much does it cost to replace?

22754644 costs $649.00 at Parts Finder Q. Installation and programming are done by your local repair shop or dealer — ask them for a labor quote.

What warranty and shipping do you offer?

22754644 comes with a 365-day warranty. Orders placed before 7 PM EST ship the same business day, shipping is free on orders over $199, and local pickup is available at our South Carolina warehouse.

Not sure it fits?

Send us your VIN — we'll confirm compatibility before you order.

Send your VIN Call +1 828-440-0199

Check fitment by VIN

Send us your VIN — we'll confirm 22754644 fits your vehicle before you order.

Average response time — 15 minutes

Product reviews

Store reviews

What customers say about Parts Finder Q

4.7 · 110 store reviews across all parts

Installed and working

Installed and working perfectly
Paul W.VerifiedBought: ABS module

What we have here is a failure to communicate

Order number Q3793 was placed and confirmed on Wednesday, 21 Oct. The confirmation email said "We will notify you when it has been sent." When no word had been received in over a week, I sent emails on Thursday the 29th @ 12:05 & a second @ 16:43 to the partsfinderq.com support asking for shipper and tracking number. There was no response to either.On Friday the 30th, a request was sent for the same information thru the site's Order Status Inquiry form at about 12:30. Average response time was shown as "15 minutes". No reply as of two hours later.So, called @ 14:35. Although my transaction was found, its status was obviously unknown. A discount was offered (which was not applied) while I guess the elusive item was being searched for. Despite the assurance otherwise, no further Parts Finder Q correspondence was received for the rest of the day.Much later, an email notice from UPS suddenly appeared @ 20:01 - "Your package is on its way!" Magic.The item was delivered Tuesday, 3 Nov. So shipping took 4 days - over a weekend, but it hadn't even actually been sent until the 30th, 9 days after the order confirmation and my card being charged. The label wasn't even created until that Friday so the part appears to have not existed when ordered.The part itself appears very clean, so an extra star for that. But I neglected to ask whether it had actually been repaired/refurbished/tested. These have become very expensive since their failure rate is apparently high, and they're not made anymore.So two questions arise: 1) Does "In Stock" really mean "on the shelf", and 2) How many days does it take to locate and send an "In Stock" part after confirming an order? This unit is for a family car in nearly continuous use and the repair needs to be dovetailed. Not having any idea when, or even if, the order would arrive prevented that. I think you can do better.Edit 11 Nov 26:Parts Finder Q applied a discount, admittedly after my initial review mentioned it. This wasn't a necessary aspect of the transaction's follow-up, but it was volunteered and appreciated. Added a star with the caveat that future customers shouldn't need to make extra enquiries for an order to go smoothly.
Steve T.VerifiedBought: ABS module

Worked

Worked great
Verified buyerVerifiedBought: ABS module

Correct part and it works

The part was correct, it was shipped fast and the Customer is happy and says his car is working fine . So far so good he said. Thank you.
Bruce A.VerifiedBought: ABS module

2012 DODGE CHALLENGER ABS CONTROL

2012 DODGE CHALLENGER ABS CONTROL.
Gary L.VerifiedBought: ABS module

Satisfied customer

My part arrived ahead of time, it was the right part and the price was better than other sellers. Communication was also excellent. I will definitely order from them again
Robert C.VerifiedBought: Airbag sensor

These guys are fantastic

These guys are fantastic. Have probably ordered a dozen modules by now for our shop and all work flawless. They will continue to get our business.
William S.VerifiedBought: ABS module

Perfect

Perfect, so happy I found it
Verified buyerVerifiedBought: ABS module

Very happy.

Have ordered multiple items so far and very happy with quality. OEM new are unavailable and these guy came through big time!
Verified buyerVerifiedBought: ABS module

The product was great

The product was great, finally got dodged, put it in and it’s working wonderfully thank you again for the experience and the quick responses.
Paul D.Verified

excellant

excellant
Verified buyerVerifiedBought: ABS module

Great part

Great part, had it installed, works like a charm
Verified buyerVerifiedBought: Compressor
110Read all store reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
  • Icon Truck, Fast Delivery
    Free shipping over $199 Place an order today and receive it on Nov 23
  • Clock Icon
    Orders placed before 7-PM EST will ship same business day
  • Location icon, warehouse pickup point.
    Pickup available usually ready in 24 hours
  • Need it fast? We offer overnight shipping

    Contact us to check if overnight next-day delivery is available for your order - PN: 22754644