Warranty
Parts Finder Q offers a warranty for all types of parts in any condition. The warranty applies exclusively to purchases made directly through our website (partsfinderq.com). Please note that purchases made through third-party platforms like eBay or Amazon are not covered by this warranty.
Product Description
| Product Name | ABS Electronic Brake Control Module (EBCM) |
| Condition | Remanufactured |
| Brand | GM® |
| Part Number | 25802683 |
| Vehicle Compatibility | |
|---|---|
| Chevrolet Silverado / GMC Sierra 2500HD | 2007–2010 (new body style; no JL1 or JL4) |
| Chevrolet Silverado / GMC Sierra 3500HD | 2007–2010 (single rear wheel; no JL1 or JL4) |
| Engine Compatibility | |
| Engines | 6.0L V8 (gas or flex-fuel), 6.6L V8 Duramax diesel |
Useful Information
Description and Purpose:
25802683 is GM's service number for the ABS electronic brake control module (EBCM) on 2007–2010 new-body Chevrolet Silverado and GMC Sierra 2500HD/3500HD pickups with single rear wheels, without the factory trailer brake controller (RPO JL1) or StabiliTrak (RPO JL4). This card is a genuine GM unit labeled 25802683, remanufactured and sold as the module only. Mounted on the ABS hydraulic unit on the driver-side frame rail below the cab, it monitors wheel speeds and commands the ABS valves and pump; when it fails, ABS shuts off and the ABS light stays on.
GM introduced 25802683 as the replacement for the original 15233173; both carry the same application notes, and GM does not publish whether anything changed besides the number. Have a module labeled 15233173? This part replaces it – or choose our 15233173 module to match the old label exactly.
Assembly vs. Module Only:
You get the module alone: one EBCM 25802683. Not included: the hydraulic unit (GM 15911550, with the ABS valves and pump motor), brake lines, wiring and programming – your existing hydraulic unit stays on the truck.
- Module only makes sense when codes and tests point at the module, the pump runs and the valve body is dry. The brake lines stay closed.
- The assembly makes sense when the fault is hydraulic – a pump motor behind a C0110 code, stuck valves, internal leaks – or corrosion or brake fluid has reached the module-to-valve joint. It costs more because it adds the hydraulic unit.
For the complete unit, see the 25802683 & 15911550 module and hydraulic unit assembly.
Vehicle Fitment:
The label on your old module should read 25802683 or 15233173; any other number means a different version.
Years and models are listed under Vehicle Compatibility, and engines under Engine Compatibility, in the table above.
Same family, not interchangeable:
- 25802684 (earlier 15858814, later 19436351): single rear wheels with trailer brake (JL1).
- 25802685 (earlier 15233172): dual rear wheels without JL1.
- 25802686 (earlier 15858819): dual rear wheels with JL1.
- 20910214 (earlier 25779780): 2009–2010 2500HD with StabiliTrak.
Also not for the 2007 Classic (19417940-family modules) or 2011+ HD trucks.
Common Symptoms and Trouble Codes:
- Signs of a failing EBCM: ABS light, ABS and traction control disabled, an unresponsive pedal, no communication with the module, an ABS pump that stays on, or intermittent operation.
- Codes that implicate the module: C0550 (control unit internal malfunction), and U0121 (lost communication with the ABS module) once fuses, power, ground, connector and data circuits test good.
- Codes that usually point elsewhere: C0035 / C0040 (front wheel speed sensor circuits), C0055 (rear wheel speed sensor circuit or plausibility) and C0245 (wheel speed sensor frequency error) – check sensors, tone rings and wiring first.
- C0561 (system disabled information stored): a module switched a function off because of a fault elsewhere – not a failure by itself.
Installation Notes:
- Programming: this module may require programming or setup – GM and ACDelco list 25802683 as requiring "programming and/or special setup procedures", though opinions differ. Plan on it and confirm with a GM dealer or a shop with a factory-level scan tool.
- Bleeding: a module-only swap leaves the brake lines closed; mechanics commonly report no bleed is needed.
- Fix the cause first: ACDelco's notes for this module family say to repair whatever damaged the original unit before installing the replacement, keep connectors clean and dry, and avoid static discharge.
- Check your work: clear the codes with an ABS-capable scan tool, drive above 8 mph, and recheck.
Manufacturer Information:
Genuine GM part, also listed by ACDelco under the same number. GM no longer sells it new and lists no newer replacement; this unit is remanufactured.
Warranty:
Parts Finder Q offers a 365-days warranty for all types of parts in any condition. The warranty applies exclusively to purchases made directly through our website (partsfinderq.com). Please note that purchases made through third-party platforms like eBay or Amazon are not covered by this warranty.
Questions & Answers
About Genuine GM® ABS Electronic Brake Control Module (EBCM) – Module Only 25802683
Not sure it fits?
Send us your VIN — we'll confirm compatibility before you order.
Send your VIN Call +1 828-440-0199Will 25802683 fit my vehicle?
Part 25802683 is listed for Chevrolet Silverado / GMC Sierra 2500HD 2007–2010 (new body style; no JL1 or JL4) and Chevrolet Silverado / GMC Sierra 3500HD 2007–2010 (single rear wheel; no JL1 or JL4) with 6.0L V8 (gas or flex-fuel) and 6.6L V8 Duramax diesel engines. To be sure, match the part number on the label of your old module, or send us your VIN — we'll confirm compatibility before you order.
Is 25802683 the same part as 15233173?
For fitment, yes: GM replaced 15233173 with 25802683 for the same trucks, so a truck with a 15233173 module takes this part.
Some sellers list 25802683 for 2007–2012 trucks. Is that right?
No. GM's catalogs run from the 2007 new body through 2010, and 2011+ HD trucks use different ABS modules. Go by GM's listing and your old module's label.
Does this ABS module need programming after installation?
In most cases, yes. GM ABS control modules usually need to be programmed or configured for your vehicle after installation using a dealer-level scan tool. Programming is done by your dealer or a local repair shop.
Is there a core charge?
No. There is no core charge on 25802683 — you don't need to send your old part back.
My truck shows "Service Trailer Brake" along with the ABS and brake lights. Do I need 25802683?
Not if it has the factory trailer brake controller (JL1), which is where that message comes from – single-rear-wheel JL1 trucks use 25802684. Trailer braking relies on ABS data, so an EBCM or wheel speed fault can light all three; scan both modules.
ABS light on for months, parts-store scanners can't read the ABS, and the cruise quit (2009 2500HD). Is the module bad?
Not proven yet. Use an ABS-capable scan tool – basic code readers often can't reach the module – and check the wheel speed sensors and wiring, then the EBCM fuses, power, ground and connector. Owners report cruise dropping out along with ABS faults.
What does "Remanufactured" mean?
A remanufactured 25802683 is a genuine GM module that has been restored to working condition for reliable operation. It is covered by our 365-day warranty, the same as a new part.
What are the symptoms of a bad ABS control module?
Common signs are an ABS or traction control warning light, stored ABS fault codes, ABS activating at low speed, or loss of communication with the module. Reading the fault codes with a scan tool is the best way to confirm the module is the cause.
Where is the ABS module located?
On most cars and pickups, the ABS control module is mounted on the brake hydraulic unit (modulator) in the engine compartment, usually near the brake master cylinder. The electronic module bolts onto the hydraulic unit and connects through one main electrical connector.
Can I drive with a bad ABS module?
Your regular brakes will still work, but anti-lock braking, traction control and stability control may be disabled, which increases stopping distance on slippery roads. We recommend repairing it as soon as possible.
How much does it cost to replace?
25802683 costs $499.00 at Parts Finder Q. Installation and programming are done by your local repair shop or dealer — ask them for a labor quote.
What warranty and shipping do you offer?
25802683 comes with a 365-day warranty. Orders placed before 7 PM EST ship the same business day, shipping is free on orders over $199, and local pickup is available at our South Carolina warehouse.
Not sure it fits?
Send us your VIN — we'll confirm compatibility before you order.
Send your VIN Call +1 828-440-0199Product reviews
Store reviews
What customers say about Parts Finder Q
4.7 · 110 store reviews across all parts
Installed and working
Installed and working perfectly
What we have here is a failure to communicate
Order number Q3793 was placed and confirmed on Wednesday, 21 Oct. The confirmation email said "We will notify you when it has been sent." When no word had been received in over a week, I sent emails on Thursday the 29th @ 12:05 & a second @ 16:43 to the partsfinderq.com support asking for shipper and tracking number. There was no response to either.On Friday the 30th, a request was sent for the same information thru the site's Order Status Inquiry form at about 12:30. Average response time was shown as "15 minutes". No reply as of two hours later.So, called @ 14:35. Although my transaction was found, its status was obviously unknown. A discount was offered (which was not applied) while I guess the elusive item was being searched for. Despite the assurance otherwise, no further Parts Finder Q correspondence was received for the rest of the day.Much later, an email notice from UPS suddenly appeared @ 20:01 - "Your package is on its way!" Magic.The item was delivered Tuesday, 3 Nov. So shipping took 4 days - over a weekend, but it hadn't even actually been sent until the 30th, 9 days after the order confirmation and my card being charged. The label wasn't even created until that Friday so the part appears to have not existed when ordered.The part itself appears very clean, so an extra star for that. But I neglected to ask whether it had actually been repaired/refurbished/tested. These have become very expensive since their failure rate is apparently high, and they're not made anymore.So two questions arise: 1) Does "In Stock" really mean "on the shelf", and 2) How many days does it take to locate and send an "In Stock" part after confirming an order? This unit is for a family car in nearly continuous use and the repair needs to be dovetailed. Not having any idea when, or even if, the order would arrive prevented that. I think you can do better.Edit 11 Nov 26:Parts Finder Q applied a discount, admittedly after my initial review mentioned it. This wasn't a necessary aspect of the transaction's follow-up, but it was volunteered and appreciated. Added a star with the caveat that future customers shouldn't need to make extra enquiries for an order to go smoothly.
Worked
Worked great
Correct part and it works
The part was correct, it was shipped fast and the Customer is happy and says his car is working fine . So far so good he said. Thank you.
2012 DODGE CHALLENGER ABS CONTROL
2012 DODGE CHALLENGER ABS CONTROL.
Satisfied customer
My part arrived ahead of time, it was the right part and the price was better than other sellers. Communication was also excellent. I will definitely order from them again
These guys are fantastic
These guys are fantastic. Have probably ordered a dozen modules by now for our shop and all work flawless. They will continue to get our business.
Perfect
Perfect, so happy I found it
Very happy.
Have ordered multiple items so far and very happy with quality. OEM new are unavailable and these guy came through big time!
The product was great
The product was great, finally got dodged, put it in and it’s working wonderfully thank you again for the experience and the quick responses.
excellant
excellant
Great part
Great part, had it installed, works like a charm







